BirdSlide
Product Overview
- Where to use - Ledges, eaves, angle irons, I-Beams and most "L" shaped ledges where total exclusion is the goal.
- Target Bird - All species including Swallows
- Bird Pressure - All pressure levels
- Material - Ultraviolet-stabilized polycarbonate
- Installation - Base is glued or screwed to any surface
- Ease of Installation – Easy
- As most bird control experts know, there are ledges where heavy pressure (nesting birds) demands an exclusion system, and netting may be visually unacceptable.
- BirdSlide completely protects the ledge against all bird species; they simply can t get a grip and slide right off the ledge.
- When colour matched to the structure, BirdSlide usually looks like it s a part of the building. It comes in grey or beige, but can be painted to match any colour.
- Catalogue Request a quote Installation Instructions


Birds were roosting and nesting on this ledge. After BirdSlide was installed, they couldn't land.


Swallows were roosting under the eaves of this home. BirdSlide was installed at an inverted angle, preventing the birds from making nests.


- Ledges 75mm to 150mm wide: Cut the trim area at the appropriate width.
- 150mm Ledges: Use BirdSlide exactly as it comes out of the box.
- Ledges Wider than 150mm: Attach these special extensions for even wider coverage.
- BirdSlide can be installed under eaves to exclude Fairy martins.

BirdSlide sits on the base (C). The extension (A) can be trimmed to accommodate narrow ledges and beams. End Caps slide (see right) slide into the triangular base opening.

Color-matched end-caps enable the applicator to install a seamless, attractive solution. The tube slides snugly into the triangular base opening. Simply glue them in and you re done (sold in a pack of 5 right and 5 left end caps).
When Total Exclusion is a Must
As most bird control experts know, there are ledges where heavy pressure (nesting birds) demands an exclusion system, and netting may be visually unacceptable. BirdSlide completely protects the ledge against all bird species; they simply can t get a grip and slide right off the ledge.
Designed to Disappear
When colour matched to the structure, BirdSlide usually looks like it s a part of the building. It comes in grey or beige, but can be painted to match any colour.
Easy to Install
For ledges 150mm, the flat base simply glues to any clean surface using Bird Barrier bond. For narrow ledges the "fin" can be trimmed down; for wider ledges an extension can be added (see diagrams on opposite page). BirdSlide can be screwed to wood.
Long-Lasting
Made from UV stabilized polycarbonate, this product will be in service far longer than its five-year warranty.

